Asix SCSI & RAID Devices Driver Download For Windows

Interface
What works:

- WebCam (tested with cheese)
- TouchPad

What doesn't work:

- FIXED: Asix AX88772B Low-Power USB 2.0 to 10/100M Fast Ethernet Controller
- FIXED: Suspend to RAM (standby)
- IMPROVED: Powersavings

What was done to make it work:

> Asix AX88772B Low-Power USB 2.0 to 10/100M Fast Ethernet Controller:
see also for latest driver: http://asix.com.tw/products.php?op=pItemdetail&PItemID=105;71;101&PLine=71
What I did to make it work (Shell):
$> wget http:// asix.com.tw/FrootAttach/driver/AX88772B_772A_760_772_178_LINUX_Driver_v4.2.0_Source.zip
$> aptitude install unzip
$> unzip AX88772B_772A_760_772_178_LINUX_Driver_v4.2.0_Source.zip
$> cd AX88772B_772A_760_772_178_LINUX_Driver_v4.2.0_Source
$> make
[if no error occurs, there should be a file asix.ko in the current dir]
$> sudo make install
$> sudo modprobe asix
[now the adapter worked as expected wen pluged into usb]
$> echo asix >> /etc/modules
[and now also after reboot without modprobe each time]
Change the interface name after USB port change (ethX), edit: /etc/udev/rules.d/70-persistent-net.rules
Suspend mode FIX: Add custom sleep script to /etc/pc/sleep.d/
I named it '20_custom-ehci':
#!/bin/sh
# File: '/etc/pm/sleep.d/20_custom-ehci_hcd'.
# Found matsching adresses using 'lspci grep USB':
# 00:1a.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
# 00:1d.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
# 03:00.0 USB Controller: Fresco Logic Device 1009 (rev 02)
case '${1}' in
hibernate suspend)
# Unbind ehci_hcd/xhci_hcd devices
echo -n '0000:00:1a.0' tee /sys/bus/pci/drivers/ehci_hcd/unbind
echo -n '0000:00:1d.0' tee /sys/bus/pci/drivers/ehci_hcd/unbind
echo -n '0000:03:00.0' tee /sys/bus/pci/drivers/xhci_hcd/unbind
;;
resume thaw)
# Bind ehci_hcd/xhci_hcd devices
echo -n '0000:00:1a.0' tee /sys/bus/pci/drivers/ehci_hcd/bind
echo -n '0000:00:1d.0' tee /sys/bus/pci/drivers/ehci_hcd/bind
echo -n '0000:03:00.0' tee /sys/bus/pci/drivers/xhci_hcd/bind
;;
esac
#EoF
POWERSAVING scripts:
#!/bin/bash
# optimize power settings (after boot/suspend)
# VM writeback timeout
echo 1500 > /proc/sys/vm/dirty_writeback_centisecs
# set pci power settings all to auto
find /sys/devices/pci* -path '*power/control' -exec bash -c 'echo auto > '{}' ;
# Mouse hack (Logitech optical mouse doesn't work correctly in auto power mode)
# Find USB BUS Controller to which the mouse is conneted
USB1=`find /sys/devices/pci* -path '*power/control' -exec bash -c 'echo '{}' ; grep mouse cut -c1-55`
# Find the USB Mouse itself
USB2=`find /sys/devices/pci* -path '*power/control' -exec bash -c 'echo '{}' ; grep mouse cut -c1-59`
if [ -f $USB1/power/control ]; then
# Power on bus
echo on > $USB1/power/control
if [ -f $USB2/power/control ]; then
# Power on Mouse
echo on > $USB2/power/control
fi
# bus back to auto
echo auto > $USB1/power/control
fi
# Intel HD Audio codec power management
if [ -f /sys/module/snd_hda_intel/parameters/power_save ]; then
echo 1 > /sys/module/snd_hda_intel/parameters/power_save
fi
if [ -f /sys/module/snd_hda_intel/parameters/power_save_controller ]; then
echo Y > /sys/module/snd_hda_intel/parameters/power_save_controller
fi
# SATA link power management
echo min_power > /sys/class/scsi_host/host0/link_power_management_policy
echo min_power > /sys/class/scsi_host/host1/link_power_management_policy
echo min_power > /sys/class/scsi_host/host2/link_power_management_policy
echo min_power > /sys/class/scsi_host/host3/link_power_management_policy
echo min_power > /sys/class/scsi_host/host4/link_power_management_policy
echo min_power > /sys/class/scsi_host/host5/link_power_management_policy
# LCD Backlight (to 50%)
#xbacklight -set 50
# power aware cpu schedules
sysctl kernel.sched_domain.cpu0.domain0.flags=687
sysctl kernel.sched_domain.cpu0.domain1.flags=559
sysctl kernel.sched_domain.cpu1.domain0.flags=687
sysctl kernel.sched_domain.cpu1.domain1.flags=559
sysctl kernel.sched_domain.cpu2.domain0.flags=687
sysctl kernel.sched_domain.cpu2.domain1.flags=559
sysctl kernel.sched_domain.cpu3.domain0.flags=687
sysctl kernel.sched_domain.cpu3.domain1.flags=559
#Disable NMI watchdog
sysctl kernel.nmi_watchdog=0

Additional notes:

Since there is 'only' a SSD disk, I considered to not use swap which I think makes hibernation impossible to work, but I don't care but for me, having suspend to ram working would be nice but doesn't work either - I have still to figure out what the cause could be.
My SSD settings:
- Enable trim support (discard) and disable file access time (noeatime)
- No swap partition
- /tmp, /var/run and /var/run/ock to ram (tmpfs)
/etc/fstab:
UUID={UUID} / ext4 rw,discard,noatime,errors=remount-ro 0 1
tmpfs /tmp tmpfs defaults,noexec,nosuid 0 0
/etc/default/rcS:
RAMRUN=yes
RAMLOCK=yes
/etc/sysctl.conf:
vm.swappiness=0
Some additional fine tuning in power management may has to be done (according to powertop)

AIX,hdisk defined!

PC Pitstop - PC Performance Roots. PC Pitstop began in 1999 with an emphasis on computer diagnostics and maintenance. During the early days of the dot com boom, our online PC maintenance tools were skyrocketing.

Asix Scsi & Raid Devices Driver Download For Windows 8

  • Echo scsi-qlascan /proc/scsi/qla/ For Emulex: sh forcelpfcscan.sh lpfc For each identified device, run the following: echo scsi add-single-device /proc/scsi/scsi. Determine the FC channels: cfgadm -al. Force rescan: cfgadm -o forceupdate -c configure cx.
  • Data Lifeguard Diagnostic for Windows. GoodSync for WD. Install WD Discovery for Windows. WD Backup (Support for WD Backup has ended. Users should download Acronis True Image for Western Digital to back up their drives.) WD Drive Utilities for Windows. WD Security for Windows.
  • Click on Device Manager and the Device Manager screen will be displayed. Click on SCSI and RAID Controllers. Double-click on the controller for which you want to update the driver. Click on the Driver tab and click on Update Driver. The Upgrade Device Driver Wizard will be displayed. Insert the appropriate driver diskette or USB key.

Asix Scsi & Raid Devices Driver Download For Windows 10

AIX,hdisk defined!

Asix Scsi Adapter

we have two ibm r6 machine,os:aix 4.3.3 ml11,hacmp 4.4.1 ,connect one 7133 with 2 ssa card,one sun 3310 with 2 scsi card.
like this:
?lsdev –Cc disk
hdisk0 Available 40-60-00-4,0 16 Bit LVD SCSI Disk Drive
hdisk1 Available 40-60-00-12,0 16 Bit LVD SCSI Disk Drive
hdisk2 Available 1A-08-L SSA Logical Disk Drive
hdisk3 Available 1A-08-L SSA Logical Disk Drive
hdisk4 Available 34-08-00-0,0 Other SCSI Disk Drive
hdisk5 Available 34-08-00-0,1 Other SCSI Disk Drive
hdisk6 Available 34-08-00-0,2 Other SCSI Disk Drive
hdisk7 Available 34-08-00-0,3 Other SCSI Disk Drive
#lspv
hdisk0 000c94cfbf73212d rootvg
hdisk1 000c94bfbf4e6182 rootvg
hdisk2 000c94cf7c312ebc IASlog
hdisk3 000c94bfafbd7d90 oralogvg
hdisk4 000c94bf8b6b451c backupvg
hdisk5 000c94bf9547fe1b DominoVG
hdisk6 000c94bfb062a75f IASvg
hdisk7 000c94bf8c76466a ora2datvg
but sometime when the machine reboot,
hdisk7 defined, and a new hdisk8 is available!
anyone knows?
thks!