Auto-intern USB Devices Driver Download

ADB (Android Debug Bridge) and Fastboot (a protocol between phone and computer is a nifty command-line tool used to interact with your Android device from a computer. In this guide, we’ll show you how you can download and setup ADB on Windows 10 computer, using ADB and Fastboot, Installing Google USB driver along with resources and a step-by-step guide.

What are ADB and Fastboot?

ADB and Fastboot are the tools used to send terminal commands to your Android phone via a computer while connected through a USB cable. Although, both serve different functions but can be installed at the same time. Below is a quick breakdown of what these tools are and what do they do.

You safely remove the USB device from the USB port. You reconnect the same USB device or a different USB device to the same USB port on the hub. In this scenario, the computer does not detect the USB device. Note This issue affects USB 2.0 hubs and USB 2.0 components in USB 3.0 hubs. This issue occurs because the USB port is disabled. MTP or (Media Transfer Protocol) is a set of custom extensions to the Picture Transfer Protocol (PTP) devised by Microsoft, to allow the protocol to be used for devices other than digital cameras, for example digital audio players such as MP3 players, and other portable media devices, for example portable video players. Download drivers for NVIDIA products including GeForce graphics cards, nForce motherboards, Quadro workstations, and more. Update your graphics card drivers today.

  • Android Debug Bridge (ADB): This tool allows you to send a wide array of terminal commands — including but not limited to basic Linux shell commands, plus some specialty developer commands — to your phone at just about any time (as long as you have debugging enabled on your phone). You can send commands while the phone is turned on and booted, or even when it’s in recovery mode. While ADB is often used in conjunction with rooting or modifying your phone, you can use ADB to send terminal commands to unrooted devices as well. ~ Lifehacker

For example, you can copy files from your computer to Android storage by using “ADB push ironman3.Mkv /sd card/Movies/” command.

  • Fastboot:a protocol between phone and computer. When you need to modify your phone’s firmware, Fastboot is the tool you need. This allows you to send commands to the bootloader, which means you can flash/modify things like custom recoveries. You can’t flash whole ROMs with it, but it’s helpful for many things that ADB can’t do. Fastboot isn’t enabled for all phones, so you may have to check your specific device. ~ Lifehacker

Drivers & Downloads. Locate drivers, user guides and product specifications for your Gateway technology. Global Nav Open Menu Global Nav Close Menu; Apple; Shopping Bag +.

You can flash a custom recovery using “fastboot flash recovery twrp.img” (twrp.img should be located in the same folder).

Both of these tools come with the Android SDK. However, that’s an extremely large download that, frankly, most users who are interested in ADB and fastboot don’t need. Fortunately, Google recently made it easy to get these two without all the junk.

Install ADB and Fastboot tool on Windows 10

Google made a relatively small package called “Platform-tools” that includes ADB and Fastboot along with some other utilities.

Step 1. Download Google SDK Tools for Windows 10

Google named Platform Tools package that includes Fastboot, ADB and other utilities. To download the Platform-tools package visit this page, These are the separate package for Windows, Linux, and Mac.

Choose an appropriate version of Platform tool, select terms and click on the big blue button to download.

Step 2. Run

Navigate to the Platform Tools folder, Right click and choose “open command prompt” from here. If you see Powershell option instead on the command prompt, use this guide.

To use ADB commands you must enable “USB Debugging” feature on your phone. Otherwise, it won’t work.

ADB commands Application

Install an Apk

USB

You can install an apk file (stored on your computer) to your phone using this command

more at Android Studio

Pulling/pushing a file

Use “adb push filename /path” to send the file to the mobile device.

For starters, I used the “fastboot devices” command will display all the connected devices which are in fastboot mode. For example to enter in fastboot mode in a Xiaomi device you have to turn off the phone, start it pressing Power + Vol Down simultaneously.

Step 3. Optional, Modify Adb Path

  1. Open “Advanced system settings.”
  2. Click “View Advanced system settings.”
  3. Click the box that says “Environment Variables.”
  4. Under “System Variables” click on the variable named “Path.”
  5. Click “Edit…” and enter ADB folder location.

Install ADB and Fastboot Drivers

Google USB drivers are required to perform ADB debugging with Android devices. Generally, when you connect the Android device to Windows 10, it will automatically download drives via Windows update. But in case it didn’t

  1. Click to download the Google USB Driver (8MB ZIP file)
  2. After download, extract the ZIP file.
  3. Open “Device manager”.
  4. Find Portable Devices.
  5. Right-click on your phone name and Update driver.
  1. Select Browse my computer for Driver Software.
  1. Now Navigate to the driver folder using the browse button. Select the extracted folder and click on next.

If everything goes right Google USB driver should be installed and your computer will recognize your phone just fine.

Install Android Bootloader Interface through Windows update

Starting with Windows version 20H2, Microsoft has quietly added it to Optional Updates. This means that you will have to go into the settings and install this software, which I am giving below in the steps and the steps are quite easy, you hardly need to face any problem in doing this from the office, for this you need an internet connection.

QUIckly open Windows settings and then Windows Updates (find under Update and security). Under the Check for update button you can see optional updates button right beneath it.

Now you have to click on the arrow icon. All optional updates will be shown here, select any update and download and install it. For this, you will need an internet connection. If you have a metered connection to your internet connection, then you can install such updates by coming here.

That’s it.

Manually Installing ADB and Fastboot Interface

Do this when ADB and fastboot commands are not working or your computer didn’t recognize devices when checking through ADB devices and fastboot devices command. This is a normal case with the recent version of Windows 10 and with some Oneplus devices.

prerequisite

  1. Disable driver signature enforcement: open a PowerShell window and enter bcdedit /set testsigning on (and off when done).
  2. Install Oneplus Driver, select Install this driver security prompt when asked.
  3. Open device manager and look for Android Phone and Android Bootloader Interface if they show up somehow.
  1. From “Action” select Add legacy hardware.
  1. Click Next.
  1. Choose Install the hardware that I manually select from a list (Advanced).
  1. Select Android Phone.
  1. Unless you’re connecting a device of other manufacturer such as Xiaomi device, Select Google, Inc. and choose Android Bootloader Interface. (Repeat the steps for Android ADB Interface).
  1. The wizard will install the software, after that the ADB and Fastboot tools should work fine with your phone. remember not all of the phones are supported Fastboot, you should check your specific device.

That’s all for now if you think we missed something you can always drop a comment below.

For users who find this process time tacking, despite it shouldn’t take longer than 10 minutes. But instead, if you prefer installing ADB+fastboot in seconds, use a 3rd party installer like this one.

Article Contents

  • Install ADB and Fastboot tool on Windows 10
    • Step 1. Download Google SDK Tools for Windows 10
    • ADB commands Application

You can use Android Debug Bridge (ADB) to connect your Fire tablet to your computer for testing and debugging. You connect your computer to your Fire tablet through a micro-USB cable.

Android Debug Bridge (ADB) is a command-line utility for running and managing Android apps on your device or emulator. For more information and instructions on using ADB, see Android Debug Bridge.

If you're looking for instructions on connecting to a Fire TV instead, see Connect to Fire TV Through ADB.

  • Check for Device Connections Using ADB (Optional)
  • Troubleshooting

Step 1: Enable Developer Options

  1. Go to Settings > Device Options and look for a Developer Options menu. If it's not there, do the following:

    a. Go to Settings > Device Options > About Fire Tablet.b. Tap your Serial Number seven times.c. Return to Device Options. A new menu appears called 'Developer Options.'

  2. Tap Developer options. (2013 models might call this option 'Security.')
  3. Set Developer options and USB debugging to ON.
  • If you have a Kindle Fire 1st Generation, ADB is enabled by default.

Step 2: Install the Kindle Fire Driver (Windows Only)

  1. If you're using Windows, download this Kindle Fire driver: kindle_fire_usb_driver.zip.
  2. After downloading the file, extract the contents into a new folder and double-click the Fire_Devices ABD drivers file.
  3. Proceed through the installation wizard screens to install the driver.

Step 3: Install Android Studio

ADB is available on your computer when you install Android Studio. If you don't already have Android Studio, download and install Android Studio. If you're not using Android Studio, you need to download and install Android SDK platform tools.

Step 4: Connect Your Fire Device to Your Computer with a USB Cable

  1. Using a USB cable, connect your Fire tablet to a USB port on your computer.

    Note that Fire tablets can treat the USB with different transfer options. After connecting the USB cable, swipe down from the top of your tablet to see the USB option used. You might see various notifications, including the USB connection type that was used when you connected the cable. The relevant notification is highlighted in the screenshot below.

    If you don't see 'Connected as Media Device', press Tap for other USB options. Then select Media device (MTP). Later Fire OS versions have a different interface here. If you're using Fire OS 7, select File Transfer.

    Note: If your USB is connected as a Camera (PTP), Android Studio won't recognize the tablet as a device in Android Studio.

    If you don't see the USB connection type in the above notifications, go to Settings > Device Options > Developer Options > USB computer connection. Set this to Media device (MTP). For Fire OS 7, select File Transfer.

  2. When the Allow USB debugging? dialog appears on your tablet, tap OK.

  3. Open Android Studio and look for the device to appear in devices drop-down menu:

    The device's name will use the android.os.Build.MODEL property for the device. KFSUWI refers to Fire HD 10 (2017) tablet. You can see a list of build model names in the Identifying Fire Tablet Devices.

    If you have not selected the 'Allow USB Debugging' dialog on your tablet, the name 'Unknown device' will appear in the devices drop-down menu in Android Studio until you allow debugging.

  4. With the tablet connected, you can now run your app on your tablet by clicking the Run App button in Android Studio.

If you run into issues, see the Troubleshooting section below.

Check for Device Connections Using ADB (Optional)

Instead of looking in the devices menu in Android Studio, you can also use some ADB terminal commands to confirm that your device is connected. ADB is useful for performing many other operations as well, such as entering sandbox mode or installing other assets. Follow these two sections:

If you skip adding ADB to your PATH, you can also Check for Connected Devices If ADB Isn't In Your PATH.

Auto-intern USB Devices Driver Download

Add ADB to Your PATH

First, add ADB to your PATH so you can more easily run ADB commands. (Your PATH is an environment variable used to specify the location of the program's executable. If you don't add ADB to your PATH, running ADB commands will require you to browse to the <Android SDK>/platform-tools directory to run adb.)

Tip: You can check whether ADB is already added to your PATH by typing adb version from a terminal or command prompt. If you get back version information, then ADB is in your PATH. If the response says adb is an unrecognized command, ADB is not in your PATH.

To add ADB to your PATH on Mac:

  1. Get the path to your Android SDK platform-tools directory:

    1. Open Android Studio and click the SDK Manager button .The location to your Android SDK appears near the top next to Android SDK Location. For example: /Users/<your username>/Library/Android/sdk

      If this is your first time opening Android Studio, there isn't an SDK Manager button. Instead, at the Welcome to Android Studio prompt, click Configure > SDK Manager and provide the location to the Android SDK.

    2. Copy the path to the SDK and paste it somewhere convenient, such as a text editor.
    3. Add /platform-tools to the end of the path you copied in the previous step. ('platform-tools' is the directory containing the ADB executable.)
    4. Copy the full path to your clipboard.
  2. Use the following command to add ADB to your .bash_profile. Replace <your username> with your actual username. Also, make sure the path points to your Android SDK.

    Your .bash_profile file is usually in your user directory, which you can find by typing cd ~ (change to your user directory). Then type ls -a (list all) to show all files, including hidden ones.

    If the file isn't there, simply create one. You can then type open .bash_profile to see the paths listed.

    After you add this PATH to your bash profile, you should see the following in your .bash_profile file:

    (Only instead of johndoe, you will see your own username.)

  3. Fully restart any terminal sessions, and then type adb. If you successfully added ADB to your path, you will see ADB help info rather than 'command not found.'

To add ADB to your PATH on Windows:

  1. Get the path to your Android SDK platform-tools directory:

    1. Open Android Studio and click the SDK Manager button .

      The location to your Android SDK appears near the top next to Android SDK Location. For example: C:Users<your user name>AppDataLocalAndroidSdk

      If this is your first time opening Android Studio, there isn't an SDK Manager button. Instead, at the Welcome to Android Studio prompt, click Configure > SDK Manager and provide the location to the Android SDK.

    2. Copy the path to the SDK and paste it somewhere convenient, such as a text editor.
    3. Add /platform-tools to the end of the path you copied in the previous step. ('platform-tools' is the directory containing the ADB executable.)
    4. Copy the full path to your clipboard.
  2. Click your computer's search button (next to Start) and type view advanced system settings.
  3. Click View advanced system settings.
  4. When the System Settings dialog opens, click the Environment Variables button.
  5. Under System Variables (the lower pane), select Path and click Edit.
  6. Do one of the following:

    • On Windows 7 or 8, move your cursor to the farthest position on the right, type ; and then press Ctrl+V to insert the path to your SDK that you copied earlier. It may look like this: ;C:Users<your user name>AppDataLocalAndroidSdkplatform-tools. Click OK on each of the three open dialog boxes to close them.
    • On Windows 10, click the New button and add this location.
  7. Restart any terminal sessions, and then type adb. If you successfully added ADB to your path, you will see ADB help info rather than 'command not found.'

Check for Connected Devices

  1. Assuming ADB is added to your PATH, run the following commands:

  2. Confirm that the serial number for your Fire tablet appears in the list of devices. For example:

    On your tablet, your device's serial number is located under Settings > Device Options.

Check for Connected Devices If ADB Isn't In Your PATH

If your terminal doesn't recognize adb as a command (that is, you didn't add ADB to your PATH), you might have to run the commands from the SDK directory that contains ADB.

  1. In Android Studio go to Tools > SDK Manager.
  2. In the SDK Manager dialog box, copy the Android SDK Location.
  3. Browse to this location in your terminal or command prompt. For example:

    Mac

    Windows

    Then go into the platform-tools directory:

    The platform-tools directory contains adb.

  4. Now run the ADB commands as follows:

    Mac:

    Windows:

    The response should list your device's serial number. For example:

    If your Fire tablet is still not detected, you may need to reboot your computer or log out and back in for the changes to take effect.

Troubleshooting

Tablet doesn't appear in list of devices in Android Studio

  1. If you don't see your tablet device in the list of devices in Android Studio, click the devices drop-down menu and select Troubleshoot device connections:

  2. Click Rescan devices.

    If rescanning devices doesn't detect your Fire tablet as a device, your micro-USB cable might be bad, you might have the wrong USB connection type (e.g, camera instead of media device), or you might not have enabled USB debugging. You can also try restarting your computer and the tablet.

Download Usb Drivers For Pc

Uninstall the non-ADB Driver (Windows)

If you previously connected a Fire tablet without first enabling ADB on the Fire tablet, you might need to remove the existing USB device driver and force re-installation of the driver. To remove the non-ADB driver:

  1. Using a micro-USB cable, connect your Fire tablet to a USB port on your computer.
  2. On your computer (Windows 10), click the search button (next to the Start menu) and type Device Manager in the search. Then select it in the results. (Other Windows versions have different options for accessing the Control Panel.)
  3. In the Device Manager window, expand Portable Devices.
  4. Right-click the Fire device and then click Properties.
  5. In the Properties window, on the Driver tab, click Uninstall, and then Confirm.
  6. Unplug your Fire tablet from your computer.

Confirm the Fire Driver Is Installed Correctly

You can confirm that the Fire driver is installed correctly by doing the following:

  1. On your computer, click the search button search button (next to the Start menu) and type Device Manager.
  2. In Device Manager, under Fire Devices, verify that that a device appears called Android Composite ADB Interface.

    If your Device Manager shows an Other Devices section with a second Fire device with a yellow alert sign, your computer is listing Amazon's unrecognized ADB module as a separate device. To fix this issue:

    1. Under Other Devices, right-click the Fire device and select Properties.
    2. On the Driver tab of the Properties window, select Update Driver…
    3. Choose to browse for the driver software, then navigate to Let me pick from a list of device drivers on my computer > Show All Devices > Have Disk.
    4. Navigate to the folder where you installed the Amazon driver (typically C:Program Files (x86)Amazon.comFire_DevicesDrivers) and select it.
    5. Ignore the warning regarding installing drivers and proceed.

      You should now correctly see your Fire tablet with the ADB driver installed.

Auto-intern Usb Devices Driver Downloads

Last updated: Oct 29, 2020